On this one, I used blue textured cardstock. The fence was cut from Cherry Cobbler and the foliage from designer paper with green and a leaf pattern on it.
Monday, May 28, 2012
This is a nod to the transportation theme which is likely popular with most of the males in our lives. Trucks, cars, planes, etc in wonderful primary colors of red, blue, yellow, orange, and black. I chose to keep the yellow border and the green ribbon and black thread consistent. I chose the card to match the dominant vehicle in the designer paper. The DP was cut 5.25x 3. The yellow border was made with a Fiskars - Upper Crest border punch, which was adhere just below the DP. I added green gross grain ribbon and taped the ends into the inside of the card. I wrapped a black thread twice around and knotted it on the front and trimmed its ends.
This is a great way to use your leftover strips of designer paper. I went through my tray of left over designer paper and selected strips of paper. I organized them by color. I laid a piece of black cardstock to simulate the card and put together strips until I was happy with combination. I added a .75" strip of black cardstock which I trimmed the ends by adding a V in each end. I wanted the ends to stand out so I cut it short enough that they rest against the DP. I stamped the greeting with a clear stamp on a Stampin Up! Decorative label punchie in black Versafine ink which was raised from the surface with 3D foam tape. Great versatile design that would make a masculine or feminine card based on the colors and patterns selected. With using black as the neutral the colors just pop and any color will do!
Saturday, May 26, 2012
The greeting on this card is one of the dies I bought. It's a Memory Box thin die. I love it. It's a bit fiddly to glue down but it's worth it. I started with a ivory card and die cut scallops with a Sizzix 12" border die. This double sided designer paper so I used the few leftovers to create a strip of rose at the top and bottom of the card. The scallop border was only glued at the straight edge so it creates a bit of dimension. I added the greeting is a bit of a darker version of the color. Then added a ribbon across the card above the greeting and added a bow.
Tuesday, May 15, 2012
Here's a few ideas on how to display a 4x6 photo calendar.
|Pins on a wire or string|
|Curly wire photo holder|
|Glass float frame|
|4 x 6 Clear Acrylic Frame|
|Magnetic 4x6 sleeve on the fridge|
|Pretty Magnet on a file cabinet|
I've been working on calendars. I have a set of 4x6" 2013 photo calendars ready. I've posted them on my calendar page. I've put the index pages here for a peek. These make a great gifts. I'm getting ready for the summer craft season where I hope to connect with those organized early Christmas shoppers.
Saturday, May 12, 2012
Thursday, May 10, 2012
Monday, May 7, 2012
I made this calendar for the other person retiring. I chose the photos him in mind. Some are reminders of time spent in Alberta and some for the area in which they are retiring. I hope I chose well. I wish them both many happy years in retirement having time to pursue activities they didn't have time for during their work life. Again, I chose a quick card so that I can send them off right away!
I have friends retiring this year and thought I would make them a calendar running from July 2012 to June 2013. I selected floral and garden images for this calendar which reflects her interests. Each is a 4x4 photo with a calendar on the bottom. Once the month/year is over the photo can be trimmed. It can become part of a collage, a scrapbook, a collection and many other creative projects. I've included a magnetic 4x6 sleeve with the calendar so it can be placed on the fridge, perhaps. I stuck to a quick card color printed as these need to be mail shortly.
Friday, May 4, 2012
I made these cards for my exchange group. I started with the metal medallion in white. I wanted a paper that would contrast nicely. I had these Cricut cut with "Just because Cards" cartridge backgrounds left over from these cards. I thought that would well. I placed a length of white ribbon across the shape below the centre. I tacked it with a bit of snail adhesive in the centre to hold in place then taped the ends to the back. I glued the shape to the black card front. I mounted the metal medallion in the top curve with 2 tiny black brads. I glued the color printed oval greeting(cut with Creative Memories cutter) in the bottom curve. I added 3 silk flowers running along the length of the ribbon and those are held in place with tiny black brads. They worked out great! Very versatile design because with just a change of flower you can have variety.
Wednesday, May 2, 2012
I started with the polka dot designer paper and cut it with the TM Ornamental die. I added a piece of satin ribbon across and taped the ends behind the die cut. I glued it to the top of the green layer which was added to a white card. I added 3 white flowers in the upper left hand corner held in place with a tiny white brad. I used a Zot to hold the button in place over the brad. I cut the greeting with my new Memory Box thin die. I really like this die. I used snail adhesive to hold it in place. The green is a panel card that came with matching envelopes.Why not make 2 while I was at it! The right hand one just has ribbon and the die is placed on the bottom.
This is a sketch challenge. I started with a blue purple card and I printed the greeting on the card's bottom right hand side. I added a piece of designer paper to the top 2/3rds. I cut 2 hearts (Sizzix die) and a scallop border (Die-namics) from pearl white card stock. I embossed the left heart with Cuttlebug Swiss Dots and the right with Cuttlebug Stylized Flowers. I taped the scallop border below the designer paper and added the hearts above. I added a piece of blue gross grain ribbon across the scallop border then tied a shorter piece in a knot to look like a bow.
Tuesday, May 1, 2012
I used sticky foil tape which I pressed to a piece of thin white card stock. This was embossed with one of the folders from the Cuttlebug Cricut Companion Embossing Folder Give a Hoot Bundle. I trimmed the metal to the embossed edge. Then I mounted it on hunter green card stock.
I started with a hunter green card onto which I stamped snow with the Stampin Up! Itty Bitty Backgrounds with white Craft ink. I ripped a piece white card stock from corner to corner and I placed one piece on the card front. I then placed a length of Handsome Hunter gross grain ribbon across the card front and taped the ends to the inside. I knotted a short piece along the length and trimmed the ends. I stamped the greeting with a clear stamp in Handsome Hunter. Then, I mounted the metal embossed tree accent I put together earlier onto the card front with 3D foam tape. I'm happy with these!