MelonHeadz Illustrations. I colored him black with pencil crayons and made the bow red and green for Christmas. I punched a SU! Modern Label punchie in the kelly green and layered a SU! Word Window greeting onto it. The greeting is stamped in red with a small clear stamp.
Let me know which of the three cards is your favorite.
Would you prefer to have your own pet's picture on your cards?
Friday, November 30, 2012
I'm venturing into an area of subject matter I've not done before. I had someone ask me last year if I made Christmas for pets which could be given to their vets, groomers, caretakers, etc. I have to say it was not something I had thought of so this year I'm jumping in!
The image is from MelonHeadz Illustrations. She has some great images. I printed the dog and then colored him with pencil crayons. I chose to color the bow in red and green for Christmas. I colored some black and some brown. I did color them all before I decided on a card design. I may have adjusted the bow and dog color with a bit more forethought. Here I have selected a white card with some plaid designer paper. I have added a forest green gross grain ribbon and added a smaller piece to create a bow. I layered the dog on forest green then adhered it over the ribbon.
Monday, November 26, 2012
This card is based on red, white and blue tags. I started with white cards. I found Designer Paper to match the tags as some were red and some were blue. I used a CottageCutz Picket Fence thin die for the border. Once cut in white I trimmed off the pointed ends. I strung the gross grain ribbon through it. Taped the ribbon to the background DP paper. I adhered the DP layer to the card front. I glued the tag to the DP with 3D foam tape. I tied the tag onto the border die with the silver cord but it is purely decorative.
I found DP in the light blue in the tag for the red tags and some with red swirls for the blue tags. I used red ribbon for the red tags and blue ribbon for the blue tags.
I used glitter designer paper on this card. I selected the sheet with the greetings then the other sheet was the trees. The pieces are cut at about 1/3 and 2/3 of the card front. The tree bottom piece is a 4" square and the greetings top piece is 1.25" tall and 4" wide. I used navy, red, and light blue card stock for cards in this set. I placed the cut edges of the 2 glitter pieces and taped them together. I placed with white ribbon across the join and taped the ends of the ribbon to the back of the DP layer. This layer was adhered to the card front. The stars were cut with a Sizzix die in 2 different sizes and colors. The large one matches the card color and the smaller is always white. These are held in place with a star shaped tiny brad.
I created the trees with gold 8" doilies. I sponged the back of the doily with green ink. I used several greens - Nick Bantock - Sapmoss green, Tim Holtz - Bundled Sage & Crushed Olive. I printed the background directly onto the card stock. The star was punched from gold foil paper and mounted with 3D tape. I added 3 red daisy confetti flowers held in place with tiny black brads. The bottom of the tree was trimmed and a black tree trunk was placed behind the lacey tree.
Left Red: The words from the "O Christmas Tree" carol printed in black on the red a card.
Right Ivory: The music sheet for the Christmas carol.
The ornament was cut with a Sizzix ornament die from foil paper. The die allows the circle and the ornament hanger to be cut separately. The medallion in the center is a Martha Stewart punchie from the same paper as the ornament. A small snowflake is placed in the center. It is held to the ornament with a tiny white brad. The background layer is spritzed with Maya Mist - Snow White, allowed to dry then embossed. A thread is strung through the ornament hanger. A piece of 3D foam tape is applied behind the hanger which adheres the ornament to the back ground layer. The thread is then taped to the back of the background which is then adhered to the card front.
Left Purple: The ornament from purple moire paper. The circle and hanger are cut from white pearl paper. The background was embossed with one of the Cuttlebug Winter Wonderland folders.
Right Red Silver: The ornament from red and silver foil paper. The circle and hanger are cut from silver metallic paper. The background was embossed with the Stampin Up Northern Flurries folder.
Thursday, November 22, 2012
Sunday, November 18, 2012
I got up this morning and decided this card needed a bit more. Does that happen to you? It needed something to unify the elements so I added some Radiant Rain Egyptian Gold mist to it. I covered the greeting so it would stay bright and clean. I'm happier with the card!
I made this card for an on-line challenge which was using eyelets on the card.
I cut the trees with the SU Stocking Accents die. I selected the tree and cut it in gold, silver, and copper. I mounted them onto crescent black card stock tags cut with a Sizzix tag die. I added eyelets to each in corresponding colors. I added cording ties that coordinate with the color of the trees. I mounted to the card with 3D foam tape. I added a greeting made with SU Modern Label punchie with Merry Christmas punched out with the SU Word Window.
Wednesday, November 14, 2012
I started with the polka dot designer paper Bella Blvd "One Fall Day" which had nice warm tones. I found card stock that matched the deep teal green in the paper. I decided to have the sentiment repeat the circle theme in the paper. I designed the sentiment myself then color printed it. I cut the sentiment with my SB circle nestabilities and cut 3 more in colors within the designer paper in graduated larger circles.
I'm really happy the way it turned out.
Saturday, November 10, 2012
I cut my foil paper to 4x5.5" and glued it to the card front. I cut the large label with the SU Apothecary Framelit in pearl white paper. The smaller label I found on a Sizzix Bigz XL Scoreboards Die called Treat Bag Toppers. This was a great find! I cut the smaller one from card stock that coordinates with the foil paper. The JOY greeting is cut with the Sizzix "Join the Cheer" sizzlet strip and adhered with liquid quick dry adhesive from a bottle with a fine tip nozzle. The sentiment is adhered to the smaller label and mounted to the larger label with 3D foam tape. You will not that the top one has pierced border which was added with the SU paper piercing template for the Apothecary Framelit set. I was a good day in class.
I created the background and color printed it in colors appropriate for the card and circles selected. I designed the card in late September and it turned out just as I imagined but I discovered the work and time involved this week. Wow!
Each card needed a dark, medium and light card stock in coordinating colors. There are 5 circles graduated cut. The circles are .5, 1, 1.5, 2 and 2.5 inches. I decided that the 1.5" one was going to be dark like the card so it would highlight the great central structure of the snowflake.
.5 inch circle punch
1 inch circle punch
1.5 inch Sizzix circle die
2 inch circle punch
2.5 inch Sizzix circle die
I designed this card in blues, purples and greens. The background is adhered to the card front. The 4 largest circles are glue on top of each other. The snowflake is held to the circle layer with a Zot. The small white circle is added to the centre of the snowflake. This element is then added to the card front with 3D foam tape.
I started with the felt ornaments in red and navy. I found some matching designer paper. I added a piece of gross grain ribbon across the top of the card onto which I added a Cuttlebug ribbon slider. I glued a color printed greeting punched with a 1" circle punch onto the slider. I added a SU Tab punch to create a hanger for the ornament. I punched a hole in the center of the punchie then folded it in half and pulled the string from the ornament through the hole. I used hot glue to adhere the hanger both front and back to the ornament. I would recommend some hot glue to hold the ornament in place as it is quite heavy and applies pressure on the ribbon. Tie the ornament onto the ribbon, knot and trim the ends. The ends of the ribbon have been taped to the back of the designer paper. This full layer is then adhered to the white card front. I placed a tiny brad in the center of the greeting which will help with keeping the ribbon in place.
Thursday, November 1, 2012
I chose the SB Heirloom Ornament Nestabilities. I used the one which would work best on the card and cut it in white card stock. I stamped the "Joy" greeting with a stamp by Rubber Stampede Posh Impressions in Versamark ink and embossed it with clear powder. I water colored the ornament which highlighted the white embossed greeting, let it dry and pressed it to flatten it. I cut the ornament hanger in violet card stock with the Sizzix Ornament #2 die and glued it to the SB ornament. I embossed the white background with the Cuttlebug Victorian folder. I cut the green branch in a moss green with the MS Double Edge Pine Needles Trim punch. I adhered the ornament to the white background then I added some white pearl thread onto the hanger, ran it through the pine border the taped the ends to the back. Adhered the pine border to the embossed layer then glued this all to the card front.